Understanding the Importance of the Right Oil for Your Vehicle
When it comes to maintaining your car’s performance and longevity, choosing the right oil is critical. Oil specifications and grades aren’t just technical jargon—they directly affect your engine’s health and efficiency. Here’s a breakdown of Some of the oils we use in our garage and why each one matters.
Our Oils and Their Uses
0W/20 Volk Por
Designed For: Volkswagen Group and Porsche
This ultra-low viscosity oil is perfect for modern VW and Porsche engines. Its formulation ensures exceptional fuel economy while providing superior protection under extreme conditions. Using anything other than this spec could compromise performance or even void warranties.
5W/20 ForEco
Designed For: Ford EcoBoost engines
Ford EcoBoost engines demand a specific oil such as 5W/20 to protect their turbocharged components. This oil supports better heat dissipation and reduces wear, particularly important for high- performance engines.
0W/30 Cit/Peug (Wet)
Designed For: Citroën and Peugeot wet belts
Wet belt engines require an oil with the right viscosity and detergents to ensure the longevity of the belt. 0W/30 prevents the buildup of sludge, protecting this sensitive system.
0W/30 For (Wet)
Designed For: Ford wet belts
Ford’s wet belt system is designed for efficiency, but requires precise oil specifications. This oil ensures the system remains lubricated and clean, preventing premature wear or belt failure.
5W/30 Low Ash Long-Life C2 C3
Designed For: General use in vehicles with low-ash requirements
This versatile oil meets the need of many modern diesel and petrol engines. Its low-ash formulation is ideal for vehicles with particulate filters, ensuring long-lasting performance and compliance with emission standards.
How to Check and Top Up Your Oil
Checking Your Oil Level:
1. Ensure your car is parked on a level surface and the engine is cold (or has been off for at least 10 minutes).
2. Open the bonnet and locate the dipstick—it usually has a brightly colored handle.
3. Pull out the dipstick, wipe it clean with a cloth, and reinsert it fully.
4. Remove the dipstick again and check the oil level between the “Min” and “Max” markers.
Topping Up Your Oil:
1. If the oil is below the “Max” marker, locate the oil filler cap (usually labeled with an oil can symbol).
2. Unscrew the cap and add the correct oil grade a little at a time, using a funnel to avoid spillage.
3. Recheck the level with the dipstick until it reaches the “Max” mark. Avoid overfilling.
If you’re unsure about the type of oil to use, visit us—we stock all the oils your car might need!
Visit Us for Expert Advice